Coolstor Door

Arya Baron Company is currently ready to produce and supply all kinds of Coolstor and greenhous doors using the modern high pressure machines manufactured by Officina Meccanica Sestese (OMS) OMS Group, Italy and with a fully integrated injection mechanism, in accordance with international standards and relying on modern knowledge and also years of research and experience in designing and producing various products for the cooling and heating industry. The variety in the design of electric, sliding and hinged doors for Coolstor with different structures and the use of various and durable fittings, as well as the use of quality raw materials in the insulation layer, has always been considered in the products of this company. Some parameters should be checked one by one regarding checking the quality of doors when buying.

Arya Baron, Manufacturer of all kinds of Coolstor doors. Contact the sales department for information on the price of the Coolstor door and order.

Types of Coolstor Door

Coolstor Door are produced in 3 different models: electric, hinged and sliding, in AryaBaron factory.

Coolstor door

Various factors affect the quality of the Coolstor door, from the material used to the airtight gasket used in the Coolstor door.

Coolstor panel

Coolstor panels also have a significant impact on providing a suitable environment for storing products and required equipment. Panel mismatch can cause various problems.

Hinged Coolstor door

All kinds of Coolstor and hinged cold storage doors manufactured by Arya Baron can be ordered and produced in thicknesses of 5 to 30 cm, width of 60 to 80 cm and height of 180 to 600 cm.
Contact the sales office to fully understand the technical specifications of the factory’s production doors.

Technical specifications of hinged Coolstor Door

B18-8: A door with the height of 180 cm and width of 80 cm
Effective height (pivot included): door height minus 12 cm
Effective width (pivot included): door width minus 12 cm
Effective height (pivot excluded): door height minus 4 cm
Effective width (pivot excluded): door width minus 12 cm
Thickness of the doors: 5 to 15 cm

Sliding cold storage door

AryaBaron factory, as the producer of modern construction materials, is highly capable of producing sliding doors in the listed technical specifications (listed below). You can choose the size of the desired door in the photo before ordering the sliding door.

Technical specifications of Coolstor sliding Door

What parameters affect the quality of Coolstor Door?

1.Frameless doors and doors with aluminum frames

In frameless Coolstor Doors, which are the latest technological achievement in Coolstor Door manufacturing in Europe, first the sheet is bent with a CNC bending machine (CNC press brake) so that the top sheet and the door periphery are integrated, and then the bottom sheet (back) of the door is bent. Finally these two sheets will be placed in the mold and the integrated injection will be performed.

In this production method, there is no need for an aluminum frame, which leads to having no partition seam and step between the sheets and the aluminum frame. These places are where pollution accumulates, and hence, this type of door becomes a very suitable option for cleanrooms and environments with high hygiene sensitivity.

In aluminum framed doors, which is the older version of cold storage doors, extruded aluminum profile is used as a holding coil for the top sheet and bottom sheet, and the separation step and separation seam, which is the place of accumulation of pollution, is inevitable in this method. Also, with the passage of time due to dynamic pressures on the door, it is possible that the sheets separate from the aluminum frame. AryaBaron also produces doors with PIR injection foam which is inflammable and a good insulator for doors used in temperatures higher than 300 Celsius, this company also produces doors with rock wool insulation that can withstand temperatures up to 900 degrees Celsius.

2.Insulation foam

AryaBaron produces doors with B1 or B2 polyurethane insulation foam, according to the German industrial standard DIN 4102, these doors are injected in the Italian fully automatic production line with a density of 41 and in an integrated manner. The thickness of this insulation layer is between 5 and 25 cm according to the application of the door.
There are three types of foam in the DIN 4102 standard classification:

not easily flammable – B1
flammable – B2
Easily flammable – B3

3.The material of the top and bottom sheet

For Coolstor Door and hot houses with conventional and simple uses, the top and bottom sheets are pre-painted galvanized or Aluzinc in various colors with the thickness of 0.3 to 0.7 mm, and for acidic and alkaline environments or environments with high moisture percentage, AryaBaron uses high-quality stainless steel, aluminum, PVC or fiberglass sheets. Also, based on the order and the costumers request, it is possible to produce doors from wood design sheets or sheets that have been rolled in the form of leather or panorama.

4.Double gasket (airtight rubber around the door)

The only airtight factor between the door and the door frame is the gasket, Therefore its material, shape and how it is installed to the door are very effective in the door’s quality.
AryaBaron uses double-peaked gaskets for high-quality airtight doors, and the materials of these gaskets are discreetly selected so that they are highly flexible in a temperature range of -30 to +100 degrees and are durable (AryaBaron uses special gaskets for temperatures below – 30 degrees and more than +100 degrees). The gasket installation method in AryaBaron doors is such that there will be no hole between the door and the gasket, and on the other hand, if the gasket is damaged, it can be easily replaced.

5.The corner’s integrated section

Old traditional systems, cut the gaskets at 45 degrees in the corners (in Persian terms) and connect these pieces to each other with glue or heat. This connection is not stable and after a short period of time sections will no longer be airtight. This is another drawback of this gasket system. The traditional rule is that if a part of the gasket is damaged, the entire gasket around the door should be replaced, the difficult and time-consuming replacement of traditional gaskets adds to all the other challenges. As you can see in the figure, in the corners AryaBaron uses integrated sections. It is used independently and the problem of glue tearing and lack of air sealing has been completely solved. An integrated corner piece consists of three smaller pieces, and if one part is damaged, the same small piece can be easily replaced, which leads to saving costs. It is possible to replace the gaskets of AryaBaron doors easily without needing special tools or expert personnel’s aid.

6.door cams

Using the latest technology of the world, AryaBaron manufactures Coolstor Door frames from bent metal profiles with furnace paint for stability against bending and shock. In double-sided cams, to prevent the creation of a thermal bridge between the outside and the inside, these cams are designed in two pieces and a T-shaped rubber profile is placed between the two pieces. One-way cams can be used in order to avoid more costs and also make installation easier. Also, all the cams are insulated with polyurethane foam (according to picture 1). Also, PVC cams and coated wooden cams are still part of AryaBaron’s production line.

7. The bar

AryaBaron places a heating bar inside the frame to prevent frosting and sticking of the gasket to the frame, also the bar heats the surface of the frame sheet. The bar around AryaBaron’s doors consist of three separate pieces and if one piece is damaged the same piece is replaced at a lower cost.

8. Rescue lever

If the Coolstor Door is locked from the outside and someone is locked inside the Coolstor Door for any reason, they can easily release the lock by pulling the lever and open the door from the inside.

9. Fittings

The use of standard and durable fittings play an important role in the efficiency and appearance of the doors, and in this context, the use of fittings that can be adjusted in several directions, increases the quality of door installation and as a result, increases the life of the product. Depending user’s environment, AryaBaron company uses stainless steel or compressed plastic fittings in their doors.

Types of Coolstor Door locks

Coolstor Door lock
heart-shape waist lock
Waist-bracelet lock with glass door
Rail lock
Night paragraph lock or pick lock
Handled or airport model lock

Coolstor Door handle

Coolstor Door handle
torch-like steel handle
Cubic steel handle
Golden steel handle
Spiral steel handle

What are the uses of the Coolstor hinged Door?

Hinged Coolstor Door are one of the most used types of Coolstor Doors. One of the main reasons for choosing Coolstor Doors is reasonable price, long service life, easy use, easy installation, etc. Hinged Coolstor Doors have a lot of energy loss, for this reason, this type of Coolstor Door is generally used in cold storages where there is less footwork. As the name suggests, due to the presence of a hinge on one side of the door, producing and designing this type of door in a very large size is not possible for the cold storage door manufacturers, since it demands a lot of space to open and close the door. And it is also possible to damage the door in large sizes from the side of the hinges.

If you need a small size cold storage door, where the amount of traffic is not high, using hinged cold storage doors is the best choice for your cold storage. AryaBaron company, provides all kinds of cold storage doors, and is ready to provide all kinds of cold storage doors in the size and quantity you want.

What type of Coolstor Door is suitable?

Cold storage doors are designed and produced in different types depending on the type of cold storage and also the type of products that are stored in the cold storage. The type of cold storage door can be different. If the amount of traffic in the designed cold storage is high, using sliding Coolstor Doors is the best and most logical choice, because the opening and closing speed of this type of door is faster than other doors.

What is the Coolstor Door and what is its use?

The right choice of the Coolstor Door is one of the most important and main things that should be taken into consideration during the construction and design of the Coolstor. The Coolstor Door door is one of the main components of the Coolstor Door, which is designed and produced in different types. There are different types of Coolstor Door doors available in the market depending on the type of use and the type of application we expect. Cold storage doors are generally divided into three categories: hinged, sliding and atmospheric Coolstore doors. The type of door of the desired refrigerator is determined depending on the type of need as well as the temperature, the type of refrigerator, the dimensions of the refrigerator, the products that can be stored in the refrigerator, etc.,. Failure to pay attention to the needs assessment before buying the cold storage door can cause spoilage of the products in the cold storage.

What is the use of the sliding door of the Coolstore?

These doors are among the doors that are used for Coolstores with many users. Sliding doors are the best type of door for Coolstores that require a lot of traffic due to the high speed of opening and closing this type of Coolstore doors. In the special and large type of this type of Coolstore doors, the opening and closing of the door becomes faster with a motor. Because the opening and closing speed of this type of door is much faster than the previous type, sliding Coolstore doors are more functional.

Arya Baron Coolstore doors have become one of the best-selling Coolstore doors of this brand due to their special design, as well as the use of raw materials and high accuracy in design. If there are many users in the Coolstore, using Arya Baron Coolstore doors is the best option.

What are atmospheric control Coolstore doors?

This type of Coolstore door is more useful for cold rooms where oxygen-sensitive products are kept. For example, atmosphere control doors are used in Coolstore for fruit and vegetable where there is a need to have a certain amount of oxygen in the air, so that these products are not damaged. This type of door increases the shelf life of food in the refrigerator by controlling the amount of oxygen in the refrigerator. Sliding type cold room atmosphere control doors are designed and built because of their sensitivity.

Atmospheric control doors are used in which Coolstores?

Atmospheric control doors do not allow the amount of oxygen in the Coolstore to decrease from the specified amount. Coolstore doors are used in Coolstores where there is a need to use environmental conditions, and it is necessary to prevent the entry of oxygen and other gases into the Coolstore. It is necessary to use Coolstore doors in Coolstore where neutral gases like carbon dioxide are used to keep food and products that can be kept healthy.

Arya Baron Toos company, the manufacturer of all kinds of Coolstore atmosphere control doors, announces its full readiness to visit all kinds of Coolstore doors produced. Contact our colleagues in the support and sales office for more information and free purchase and advice before purchasing in the Coolstore.

Applications of cold storage doors

Obviously, Coolstore doors are designed and produced to prevent the temperature of the Coolstore from increasing. But each type of Coolstore door is used for a specific Coolstore and in specific conditions. Coolstore doors are generally designed and manufactured in thicknesses of 7 to 15 cm, note that this number is higher for sub-zero Coolstore Coolstore.

The type of product packaging as well as the arrangement of the products in the Coolstore are among the things that can affect the suitability of the Coolstore door.

Also, the required temperature in the Coolstore has a direct effect on the thickness of the Coolstore door. As the Coolstore temperature decreases, the use of Coolstore doors with a larger diameter is required.

Why is Arya Baron the best cold storage door design company?

Arya Baron Company is one of the active companies in the field of production and manufacturing of sandwich panels, cold Coolstore and new construction products. Arya Baron company is currently known as one of the top manufacturers of these doors due to its extensive activity in designing and manufacturing all kinds of Coolstore doors. This company also designs suitable and professional cold storage doors due to the use of fully automatic machines and the use of high-quality sandwich panels.

What is the best Coolstore door?

The best Coolstore door will be determined depending on your needs and the type of products you are going to store in the Coolstore, contact the numbers listed on the website for more information and advice before buying a Coolstore door.

How much is the price of the cold storage door?

Contact the sales office of Arya Baron Toos for information about the price of sub-zero Coolstore doors, the price of electric, sliding and hinged cold storage doors.